Search results for "Plane stress"
showing 10 items of 22 documents
Effect of strain rate cycling on microstructures and crystallographic preferred orientation during high-temperature creep
2016
Strain rate histories and strain magnitude are two crucial factors governing the evolution of dynamic recrystallized grain size and crystallographic preferred orientation (CPO) in rocks and ice masses. To understand the effect of cyclic variations in strain rate or non-steady-state deformation, we conducted two-dimensional, coaxial plane strain experiments with time-lapse observations from a fabric analyzer. There is a continuous reequilibration of microstructure and CPO development associated with constant and oscillating strain rate cycles. These can be correlated with c -axis small circle distributions, diagnostic of dynamic recrystallization involving new grain nucleation and grain boun…
The mechanically-based approach to 3D non-local linear elasticity theory: Long-range central interactions
2010
Abstract This paper presents the generalization to a three-dimensional (3D) case of a mechanically-based approach to non-local elasticity theory, recently proposed by the authors in a one-dimensional (1D) case. The proposed model assumes that the equilibrium of a volume element is attained by contact forces between adjacent elements and by long-range forces exerted by non-adjacent elements. Specifically, the long-range forces are modelled as central body forces depending on the relative displacement between the centroids of the volume elements, measured along the line connecting the centroids. Further, the long-range forces are assumed to be proportional to a proper, material-dependent, dis…
A Theoretical Model to Evaluate the Compressive Behaviour of RС Jacketed Columns
2016
Reinforced concrete (RC) jacketing is becoming increasingly common among the different retrofit techniques for poor RC members, due to its economical and practical advantages. Experimental investigations in the literature have shown that the actual axial capacity of RC jacketed members can be substantially lower than that analytically evaluated by adapting the most common theoretical models for confined concrete. This fact can be explained by taking into account the presence of tensile stresses developing in the concrete, due to a mutual interaction between the inner core and the external jacket. This phenomenon is relevant especially in members where the concrete properties of the jacket a…
The influence of strain rate and presence of dispersed second phases on the deformation behaviour of polycrystalline D2O ice
2018
ABSTRACTThis contribution discusses results obtained from 3-D neutron diffraction and 2-D fabric analyser in situ deformation experiments on laboratory-prepared polycrystalline deuterated ice and ice containing a second phase. The two-phase samples used in the experiments are composed of an ice matrix with (1) air bubbles, (2) rigid, rhombohedral-shaped calcite and (3) rheologically soft, platy graphite. Samples were tested at 10°C below the melting point of deuterated ice at ambient pressures, and two strain rates of 1 × 10−5 s−1 (fast) and 2.5 × 10−6 s−1 (medium). Nature and distribution of the second phase controlled the rheological behaviour of the ice by pinning grain boundary migratio…
A microplane model for plane-stress masonry structures
2003
Publisher Summary For a refined nonlinear finite element analysis of masonry structures, an accurate constitutive model that is able to reproduce the desired phenomenological material features is required. Constitutive models for quasi-brittle materials, as plain concrete, have been proposed in the chapter, which allow to reproduce the very complex response in the two- or three-dimensional state of stress. Usually, the constitutive relations proposed are based on some appropriate extensions of elastic-plastic continuum models and more recently on continuum damage models. It has been observed that for these tensorial-based constitutive relations to be effective often require a large number o…
Concrete softening effects on the axial capacity of RC jacketed circular columns
2016
Abstract Among the different strengthening techniques to repair RC structures, reinforced concrete (RC) jacketing is one of the most commonly adopted, especially for columns. Its wide application is due to its easy application and relatively reduced cost with respect to other methods (e.g. FRP wrapping, Shape Memory Alloy active confinement). The target of RC jacketing is to increase axial, flexural capacity and ductility of weak existing members by means of two main effects: confinement action provided by the jacket and composite action between external jacket and inner concrete. Different theoretical studies have been carried out to calculate the strength enhancement due to confinement ac…
Strain state analysis of InGaN/GaN - sources of error and optimized imaging conditions.
2006
Transmission electron microscopy investigation of the chemical composition of In x Ga 1-x N/GaN layers by strain state analysis can lead to substantial artefacts. We evaluated simulated images in dependence of specimen thickness, specimen orientation and objective lens defocus. We observed that the measurement is in agreement with the true strain profile for certain conditions only. An analysis of error sources revealed that artefacts are mainly caused by a combination of delocalization and the composition dependence of the phases of the beams contributing to the image formation. The delocalization effect is minimized for interference of the undiffracted beam with one of the 000 ± 2 beams. …
A Numerical Method for the Analysis of Plane-Strain Forming Processes with Unilateral Constraints
1983
The Authors propose a numerical model for the solution of plane-strain forming processes, based on the linearization of the yield surface. This allows to employ the linear programming technique for the solution of the variational problem derived from the application of the upper-bound theorem. Such a model permits to take into account the unilateral constraints in a very simple way. Therefore it is well suited to solve a large class of problems, such as sheet forming, in which the unilateral constraints are often present.
Formation of surface roughness on nanocrystalline aluminum samples under straining by molecular dynamics studies
2006
International audience; The surface roughening of nanocrystalline aluminum samples was investigated by molecular dynamics simulations. Attention was focused on the fact that roughness increases with the grain size and the strain. The elastic-plastic transition was found at around 3.5% strain and a reverse Hall-Petch effect was observed under straining conditions. Then, different strain distributions in grains and grain boundaries at the samples surface was highlighted, yielding to the formation of local roughness. Finally, a linear relationship between the magnitude of roughness and the out-of-plane strain component was found.
Two multilayered plate models with transverse shear warping functions issued from three dimensional elasticity equations
2014
Abstract A multilayered plate theory which uses transverse shear warping functions is presented. Two methods to obtain the transverse shear warping functions from three-dimensional elasticity equations are proposed. The warping functions are issued from the variations of transverse shear stresses computed at specific points of a simply supported plate. The first method considers an exact 3D solution of the problem. The second method uses the solution provided by the model itself: the transverse shear stresses are computed integrating equilibrium equations. Hence, an iterative process is applied, the model is updated with the new warping functions, and so on. Once the sets of warping functio…